1.The solidwork format export into .stl format 2.Open the .stl file with software Cura. ab7nOI.jpg 3.adjust the size and angle abvgwd.jpg 4.Set the printing parameter abxJ9P.jpg

Special note:Infill, top and bottom speed low down; Support, check the printing area out of panel; check the original point location.

5.preview and save to file 6.copy in SD, insert the Card 7.Stat the machine, pick the related files, printing.

finish product abxZp6.jpg

We used diagonal pliers to remove the support. wCS0CF.png

results matching ""

    No results matching ""